Licensed and Insured · COI Available
Free·No Obligation
Describe your issue - we'll call with an estimate
Professional HVAC Service in New York
Residential and Commercial HVAC ServicesHVAC systems.
We service air conditioning, heating, and integrated HVAC systems - from common operational issues to complex technical failures.
Our goal is to accurately identify the root cause of the problem and provide a reliable, technically sound solution - not to replace parts based on guesswork.
Service pricing starts from $130
🔹HVAC Service Call & Diagnostics
System diagnostics, fault detection, and evaluation of equipment condition with clear recommendations.
🔹Emergency HVAC Repair
Emergency repairs for HVAC system failures, overheating, refrigerant leaks, or loss of heating or cooling.
🔹Air Conditioning System Repair
Central AC, Mini-Split, Multi Split, Heat Pump, PTAC, Rooftop Units, WSHP, VRF / VRV systems.
🔹 Heating System Repair
Furnace, boiler, and water heater repair and troubleshooting.
🔹 Refrigerant & Leak Services
Refrigerant leak detection and diagnostics
Leak repair and brazing
Refrigerant charging and recovery
System performance optimization
🔹 Indoor Unit & Air Handler Repair
Repair and restoration of indoor units and related components.
Air Handlers, Wall-Mounted units, FCUs, Cassette units.
🔹Drainage & Condensate Systems
Drain line cleaning
Condensate system repair
Condensate drainage troubleshooting
We provide a full range of HVAC repair services, including electrical, mechanical, and refrigeration components, while meeting all technical standards and safety requirements.
We work with air conditioning, heating, and ventilation systems — from standard installations to technically complex projects.
Our goal is to select the right equipment, install it in accordance with industry standards, and ensure reliable, safe, and long-term system performance.
System installation starting from $2,000
🔹Cooling & Heat Pump Systems
Central AC Systems
Heat Pump Systems
Single-Zone Mini-Split Systems
Multi-Zone Systems
VRF / VRV Systems
PTAC Units
Rooftop Units (RTU)
🔹Heating Systems
Gas & Electric Furnaces
Boiler Systems
Water Heaters Systems
🔹Indoor Unit Installation
Air Handler Units
Fan Coil Units
Wall-Mounted & Cassette Units
🔹Refrigerant & Drainage Systems
Refrigerant Line Sets
Condensate Drain Lines
Condensate Pumps
🔹 HVAC Electrical Work
HVAC Electrical Wiring
Equipment Connection & Protection
🔹Ventilation & Equipment Relocation
Fresh Air Systems
ERV / HRV Units
Ventilation Fans (exhaust, supply, inline, booster)
Equipment Relocation (Outdoor & Indoor Units)
All installation work is performed in compliance with local building codes, industry standards, and manufacturer specifications.
Our work is focused on restoring proper system operation, improving indoor air quality, and preventing performance issues caused by dirt, dust, and buildup.
We service indoor and outdoor units, drainage systems, ventilation components, and ductwork — from targeted equipment cleaning to comprehensive system-wide solutions.
HVAC cleaning starting from $150
🔹Deep Cleaning of Indoor HVAC Units
Wall-Mounted Mini-Split Deep Cleaning
Cassette Unit Deep Cleaning
Fan Coil & Air Handler Deep Cleaning
PTAC Unit Deep Cleaning
WSHP Deep Cleaning
Window AC Deep Cleaning
🔹 Coil & Fan Cleaning
Outdoor Condenser Coil Cleaning
Evaporator Coil Cleaning (non-invasive, no full disassembly required)
Blower Assembly Deep Cleaning
🔹Drainage & Condensate Systems
Drain Line Cleaning
Drain Pan Cleaning
Condensate Pump Cleaning
🔹 Ventilation & Duct Cleaning
Duct Cleaning
Dryer Vent Cleaning
Duct Camera Inspection
🔹Air Quality Treatment & Sanitation
Mold Treatment in HVAC Systems
Humidifier Cleaning
Dehumidifier Cleaning
All cleaning services are performed using professional equipment and HVAC-safe cleaning products, in accordance with manufacturer recommendations and industry standards.
We provide maintenance services for air conditioning, heating, and combined HVAC systems for both residential and commercial properties, with a focus on system performance, safety, and long-term reliability.
Maintenance services starting from $200
🔹 HVAC Tune-Up
Full HVAC System Tune-Up
Seasonal Tune-Up (Spring / Fall)
Quarterly System Inspection
🔹Preventive HVAC Maintenance
Preventive Maintenance Program
Seasonal Preventive Maintenance
Quarterly Preventive Maintenance
🔹Furnace Maintenance & Tune-Up
Furnace Tune-Up
Furnace Preventive Maintenance
🔹Boiler Maintenance & Tune-Up
Boiler Tune-Up
Boiler Preventive Maintenance
🔹Service Add-Ons
Filter Replacement Service
Drain Line Flush
Condenser Coil Straightening
Airflow Check & Balancing
The scope of maintenance services and service frequency are determined individually, based on equipment type, operating conditions, and manufacturer recommendations.
All solutions are developed for each specific space, taking into account layout, airflow loads, and real operating conditions.
Every system starts with airflow logic — not guesswork.
On-site working layouts are used to accurately calculate duct sizes, CFM distribution, and equipment placement before installation begins.
Ductwork starting from $500
🔹 Ductwork Installation & Repair
Ductwork Installation (metal / flex)
Ductwork Repair
Duct Modification
Duct Sealing
Duct Leakage Testing
Duct Insulation (foil, fiberglass, acoustic)
🔹Air Distribution & Balancing
Air Distribution Optimization
Airflow Balancing
Return Air System Upgrades
Grilles, Registers & Diffusers Installation
🔹Exhaust & Space Ventilation
Kitchen Hood Venting
Bathroom Exhaust Fan Installation
Attic Ventilation Improvement
Exhaust & Supply Fan Installation
🔹Fresh Air & Make-Up Air Systems
Fresh Air Intake Systems
Make-Up Air Systems
ERV / HRV Installation & Service
🔹Fans & Airflow Boosting
Inline Fan Installation
Duct Booster Fan Installation
🔹 Engineering & System Design
Equipment Selection (CFM / BTU based on system requirements)
Shop Drawings for Ductwork Fabrication
🔹 System Start-Up & Testing
System Start-Up & Functional Testing
All work is performed based on actual site conditions, equipment requirements, and applicable local building codes.
Can’t find what you’re looking for? Contact our team directly.
- Do I need to completely replace the HVAC system when moving into a new office or salon space? Not necessarily. We approach every project from an engineering perspective first. We’ll conduct a full audit of the existing equipment to see if it can be adapted to your new layout through professional adjustments. This often saves our clients a significant amount of money compared to a full new installation.
- My previous contractor installed a system incorrectly and won’t respond. Can you fix it? Yes, we specialize in "rescue" projects. Our team will perform a deep diagnostic, correct wiring mistakes, and ensure the system is properly charged with refrigerant. We stay on-site as long as it takes to get your system running perfectly.
- How long does a typical repair or diagnostic take? It depends on the complexity, but we prioritize quality over speed. If a system was poorly installed by someone else, we are prepared to spend the entire day troubleshooting until every component works exactly as it should.
- What does your AC cleaning process involve? We don't just do a "quick wipe." Our technicians take the units apart to reach internal components and use professional-grade chemicals for a deep clean. This ensures efficiency and fresh, bacteria-free air.
- Will your technicians leave a mess in my home or business? Cleanliness is a priority. Before starting, we cover your furniture and walls with protective materials. We make sure your space is as clean as we found it when the job is done.
- How often should I have my HVAC system professionally serviced? For residential systems, we recommend a tune-up twice a year (spring for AC, fall for heating). For commercial spaces like salons or offices, quarterly maintenance is best to handle the higher workload and ensure air quality.
- What is a Ductless Mini-Split system, and is it right for me? Mini-splits are highly efficient systems that cool or heat specific rooms without the need for ductwork. They are perfect for older buildings, room additions, or spaces where you want independent temperature control for different areas.
- Can you integrate "Smart" thermostats with my existing system? In most cases, yes. We can install and calibrate smart thermostats (like Nest or Ecobee) to help you monitor your energy usage and control your climate remotely from your phone.
- How do I know if my system just needs a repair or a full replacement? If your unit is over 10-15 years old, requires frequent expensive repairs, or your energy bills are spiking, a replacement might be more cost-effective. We will always provide a transparent "Repair vs. Replace" comparison so you can make an informed decision.
- How can I be sure I’m not being oversold on parts? Our reputation is built on honesty. If your current system can work well with just a few adjustments, we will tell you that instead of pushing a brand-new installation. We only recommend what is technically necessary.
